Tuesday, 29 September 2015
Municipality of Isabela Agrees to Environmental Improvements at Landfill; Settlement with EPA Sets Timetable for Landfill’s Closure and Launches Recycling Program
EPA Proposes the Addition of Sites in Atlantic, Iowa, and Norfolk, Nebraska, to Superfund’s National Priorities List
Thursday, 24 September 2015
Feeling pressure regarding air quality compliance or soil migration regulations? Demolition and industrial contractors run into many problems when removing lead paint on their projects.
Quick and Reasonable Solution for Lead Paint Removal
More and more often, demolition companies are finding ECOBOND® a safe, reasonable solution for industrial projects for lead paint removal. ECOBOND® seals and treats the lead and lead dust in lead-based paint, rendering it non-hazardous for disposal. (Interested in sizing up lead and lead dust particle sizes? See Engineering Toolbox's recently-updated chart.) Also, because it is a Paint-it-on Leave-it-on® application, its use reduces project timelines and helps families (and businesses) get back into their properties sooner, and safer.
A growing number of demolition experts and project managers use ECOBOND® in their lead paint removal projects. For one reason, it is a safe and accepted industry solution that's relatively simple to use. Another reason is that it complies with Resource Recovery and Conservation Act (RCRA) EPA requirements regarding lead airborne particulates. Obviously, compliance is not optional - and it is the responsibility of the demolition company. Prior to blasting in your containment system, treating items with ECOBOND® solves several problems. Such a treatment provides worker and vicinity residential safety, reduces airborne lead dust particulates and at the same time seals lead and lead paint dust, rendering it non-hazardous for disposal.
Before blasting or scraping, using ECOBOND® helps ensure Toxicity Characteristic Leaching Procures (TCLP) will meet using EPA-approved test levels and methods. (For more on EPA's TCLP requirements, see the EPA's website.)
Economical and Safe
In addition to being easy to use, ECOBOND® is far less expensive than paint strippers and encapsulants. Its average coverage area is essentially the same as regular latex paint,* and yet is only slightly higher in cost.
This multi-use lead paint treatment can be used to seal and treat lead dust and lead in lead paint. Because it can be applied as a Paint-it-on Leave-it-on® application primer, or even more efficiently, used as a tintable paint, it is also a very convenient solution.
Resource for Lead Paint Demolition, Disposal Questions
If you have questions about the process of working with clients or municipalities regarding demolition or lead paint removal projects, contact us - we have the experience to help you do the job, minimize risk to your workers, and satisfy necessary compliance requirements.
*Regular latex paint is not formulated for sealing or treating lead paint
Lead Paint Demolition: Protect Your Workers & Your Business
While lead paint removal projects are usually undertaken with the best intentions, and everyone's focus is on the health and safety of the residents and workers at the project site, unfortunately, things can go wrong.
Let's be blunt: lead paint removal isn't the easiest job.
Avoid Fines to Protect Your Business, Your Workers, Your Clients
Successful lead paint demolition projects require a balance of components: trained workers, top-notch removal and remediation products, the proper use of those products, and careful work habits. Falling short can mean doing an incomplete job, and that can lead to additional health issues for workers and clients.
In such cases, companies can be fined due to poor compliance. Few demolition contracting companies can afford to pay such fines without severe consequences to the business - not to mention potential health risks to workers and those living in or near the job site.
Education, Proper Product Selection & Usage
ECOBOND®, serving lead paint demolition professionals for more than 10 years, has seen its unique products used in both industrial and commercial industries to successfully treat more than a million tons of contaminated materials.
While effectiveness and compliance are the primary drivers when contractors select ECOBOND® products, many also say that the relative ease of use factors into their product choice. They also consider the fact that ECOBOND® allows a contractor to save time and win more bids, thereby limiting exposure to potentially dangerous lead particles for workers and area residents.
Lead Paint Demolition Questions Answered
Demolition and removal projects can be difficult, and each one has a unique combination of challenges. Whether you have questions about product application, interim control, or compliance best practices, you can ask the experienced ECOBOND® staff.
Contact us weekdays by phone at 888-520-7132, or by email anytime.
Virgin Islands Water and Power Authority Signs Legal Agreement with EPA and U.S. Department of Justice to Reduce Air Pollution at Two Power Plants
Quick and Reasonable Solution for Lead Paint Removal
More often, demolition organizations are finding ECOBOND a secure, reasonable solution for industrial projects for lead paint removal. ECOBOND seals and treats charge and lead dust in lead-based paint, rendering it non-hazardous for disposal. (Interested in sizing up lead and lead dust particle sizes? See Engineering Toolbox's recently-updated chart.) Also, because it's a Paint-it-on Leave-it-on application, its use reduces project timelines so it helps families (and businesses) return to their properties sooner, and safer.
A growing number of demolition experts and project managers use ECOBOND within their lead paint removal projects. For one reason, it is a safe and accepted industry solution that's relatively simple to use. One other reason would it be complies with Resource Recovery and Conservation Act (RCRA) EPA requirements regarding lead airborne particulates. Obviously, compliance isn't optional - and it is down to the demolition company. Just before blasting with your containment system, treating items with ECOBOND solves several problems. This kind of treatment provides worker and vicinity residential safety, reduces airborne lead dust particulates and as well seals lead and lead paint dust, making it non-hazardous for disposal.
Before blasting or scraping, using ECOBOND helps to ensure Toxicity Characteristic Leaching Procures (TCLP) will get together using EPA-approved test levels and techniques. (For further on EPA's TCLP requirements, begin to see the EPA's website.)
The Country's Shooting Sports Foundation has specific criteria for design, but owners and clients can still help prevent bullet ricochet at gun ranges. Below are a few considerations that experts and former the police suggest remembering when making and choosing a range.
Gun Range Lead Removal is vital for safety
Targets - metal targets increase chances for bullets to ricochet.
Bullets - round nose bullets may ricochet than flat nose as they generally move with a higher velocity
Side Berm/Backstops/Safety Fan - must be placed within an appropriate distance to trap all bullets that will ricochet
Manger or Extra Layer - Adding an array will make sure proper lead collection and cleanup.
Kansas City and St. Louis, Mo., and State of Missouri to Receive Shares of EPA Brownfields Funds for Environmental Cleanups
EPA Takes Action Against Underground Petroleum Storage Tank Violations in Monmouth County, Middlesex County and Paterson, New Jersey
Friday, 18 September 2015
Why Should you Remove Lead Paint?
Here's a listing of reasons why you need to remove lead paint in your home office:
Lead paint situated on egresses (doors and windows) will erode as time passes, and create a toxic environment.
Lead paint that's chipping is already releasing toxic fumes to the air.
If you are renting to a family with children, it's particularly important to eliminate lead paint, as the toxicity factor is doubly gone through by children. Lead paint that chips and lands onto children's toys (which may then be put into their mouths) is particularly dangerous.
For you to work with a professional to get rid of lead paint...and why you need to ask that they can use Ecobond!
Removing lead paint is just not something that needs to be made by anyone but a professional -- an experienced is taught to handle lead remediation without causing air toxicity.
Lead paint removal cost
Ecobond products happen to be tested, using EPA methods, and possesses been definitively shown as able to treating and remediating lead. In fact, the Ecobond family of products have been extensively used through the US and internationally in successfully treating lead hazards in over 11,000,000 plenty of material.
Thursday, 17 September 2015
Representative Rodney Frelinghuysen and EPA Tour Superfund Sites in Morris, Essex and Sussex Counties
Wednesday, 16 September 2015
Industrial contractors who handle lead paint remediation and lead paint demolition projects are typically well-versed in their state safety requirements as well as OSHA and other national safety standards.
Generally, their customers are not as aware of the hazards and current methods of securing a lead paint site. Regardless of the size of a demolition project, it's important to make sure both contractor and customer have some common understanding regarding the lead paint demolition work.
Customers and Building Owners: Understanding Lead Paint Hazards
If you've been hired to remove a lead paint hazard, your customers are counting on you as the expert. However, to ensure their safety, as well as that of your workers, and ultimately complete the project properly, a little customer education is probably in order.
Start with these points and be prepared to answer your customer’s questions as they come up. Often, customers have more questions after a project is underway than they do before it begins.
- Any painted structure built before 1978 is likely to contain lead based paint. The older the building, the more likely its demolition will deal with multiple layers of lead paint, and therefore, higher concentrations of lead.
- Even if the structure has been repainted, covering up lead paint does not remove the lead hazard. ECOBOND® LBP provides cost-effective solutions for typical interior and exterior lead paint projects such as: Securing and treating the area prior to lead paint component removal (including lead paint peelings and chippings) is part of the process - not "just" clean-up.
- Lead paint removal products have evolved and improved in the past three decades, so many commonly-held beliefs are actually outdated. (And in some cases, dangerous.) For example, ECOBOND® LBP allows contractors to seal and treat led dust and paint on a component, then dispose of it safely - meaning stripping is no longer necessary in most cases.
Your clients will appreciate your taking the time to explain your process to them.
Many customers are more interested in demolition and removal than disposal, but some will be glad to learn that when ECOBOND® LBP is applied properly, removed and collected solid waste will typically pass the RCRA TCLP test as non-hazardous for lead. (As disposal and sampling requirements vary by locality, check with your state, municipality, and local agencies for additional requirements.)
Regulations You Know, and May Want to Share
Your customers are more likely to respect your process and your workplace methods when they understand the government regulations you must adhere to. You may invite them to review OSHA regulations regarding lead paint removal and renovations at the agency's website.
If you have questions about available lead paint removal products and how contractors and agencies use them most effectively, please contact us.
Tuesday, 15 September 2015
EPA To Take Public Input on Draft Plan to Decontaminate and Dismantle PCB Processing Facility in Fort Edward, NY
Settlement with Current and Former Owners of Chemical Facility in Pleasant Hill, Iowa, to Address Groundwater Contamination
Tuesday, 8 September 2015
Increasingly, industrial projects for lead paint removal face scrutiny for more than "just" getting the job done. While there remains a critical need for lead paint removal projects, contractors are getting more pressure to ensure their methods are safe and the lead paint chips, dust, and soil in the area are fully contained. And then, that disposal is hazard-free.
Worker Safety, Site Containment Simplified
As you surely know, EPA's Lead Renovation, Repair and Painting Rule (RRP Rule) requires that firms that provide renovation, repair, and painting services that disturb lead-based paint in homes, child care facilities and pre-schools built before 1978 be certified by EPA (or an EPA authorized state), use certified renovators who are trained by EPA-approved training providers and follow lead-safe work practices.
Demolition companies and industrial contractors that provide lead paint removal services are facing increasing scrutiny for their management of such projects, and as always, must balance getting the job done with ensuring their workers' safety in the process.
Leave-On Products Come of Age, Provide Safer Disposal
While leave-on products for lead paint remediation have long been used, like many things, the technology and application processes have continued to improve.
Additionally, when proper application methods are used, not only are relatively lead bioavailability levels dramatically lower during remediation work, treated waste is deemed non-hazardous.
Be sure to watch our ECOBOND® Industrial Video Commercial
If you are finding new projects and regulations demand a little more of your lead paint removal products, contact us. We are experienced in EPA compliance, worker and residential safety issues, and committed to the safe removal of lead paint hazards.
Thursday, 3 September 2015
Do you currently own a farm? If you have a farm or know the owner of a farm, you may be able to rent some land to a utility company for installing a wind turbine. You and the neighbors can benefit from this free installation and energy which won't take up much space.
When you are not using your appliances, you should make sure they are turned off. If you are in a room, make sure that the light is turned off when you exit. If you leave your home, ensure the TV is turned off. These little things can greatly decrease the amount of energy you use in your home, which will leave you with some extra cash in your pocket at the end of the month.
Make sure that your home is completely sealed from all drafts, if you want to live green and use the principals of green energy. Windows and doors are your biggest culprits for letting hot and cold air out of your home. So, seal them up and start saving money.
As a way to live greener, purchase power strips for your home. In areas where you have multiple electronics, you can utilize these power strips as a central hub where you may shut off all power to these electronic devices when they are not in use. As an example, if you have a home office, by plugging in your computer, printer, wireless router, and desk lamp into a power strip, you can turn them all off with the flip of a single switch when you are finished with your day's work.
If there is running water on your property, you should consider investing in a good hydro-power solution. A simple mill can turn into an energy generator. Get in touch with Department of Energy Efficiency and Renewable Energy to find out if your stream is strong enough to produce a significant amount of power.
In some areas of the world people can sign up for wind and geothermal energy from their power supplier. This is usually a little more money, but it is green energy that you are buying and do not have to invest in the machinery to make it. This helps relive the stress for fossil fuels by your energy company.
To help you improve the green energy efficiency of your home, consider installing solar panels in your home. Solar panels are a good source of renewable energy and can be installed at a relatively low cost. In addition, you will reduce your reliance on fossil fuels and other forms of unsustainable energy.
Now that you have read the article, you know that green energy is smart energy. It is safe, cheap, and clean. Take the tips in this article and use them to make your life greener. Apply the tips to your life, and you will soon see how green energy is beneficial for you.
Tuesday, 1 September 2015
There are many ways to deal with lead paint in the home. As a homeowner, however, you must take time to research and be aware that some methods can actually increase the risk of lead exposure for yourself, your family, and even your pets. Carefully consider your options when it comes to lead paint removal and aim for the option that minimizes the risk of exposure by as much as possible.
Your first option is good old fashioned removal of the paint by hand. This option may seem like a winner at first, but then one should consider the hidden cost involved. To make removal of lead paint via sanding feasible, one would have to purchase safety equipment such as disposable suits, hair and shoe coverings, eye protection, a HEPA vacuum, gloves, sheets of plastic to cover surfaces, and NIOSH or MSHA approved respirators. Plus tape and framework if one intends to section off entire rooms at a time. Even with all of these protective measures, the risk of exposure to lead dust is still high.
Removal and Replacement
Another option for eliminating lead paint is the total removal of the pieces from the home. Things such as window fixtures, door frames, baseboards, trim, and even entire walls may be removed from the home and taken off site then replaced with new pieces. However, this method will also require many of the protective items from the first method. Though removal won't generate quite as much lead dust as the first method, dust will still be present and will require containment and removal from the home.
And finally, encapsulating is the third option when it comes to dealing with lead paint. Some think that simply covering the lead paint with wallpaper or similar covering will be enough to eliminate the risks. However, this is not so unless you opt for ECOBOND®. Other paints simply cover the lead, but ECOBOND® goes a step further to penetrate into the lead paint and neutralize it from within. Not only will ECOBOND® effectively cover and reduce the risk of lead dust and particles by 99%, it also reduces the hazard of lead poisoning by 95%! This means that even if you decide to remove the paint after sealing it with ECOBOND®, the risk of lead exposure will be drastically reduced.
For more information about lead paint removal products and the other many benefits offered by ECOBOND®, we invite you to visit our website. Additionally, you may contact us with any questions or comments.
ECOBOND®: the best of the lead paint removal products!
You're a homeowner about to rent your property, and you discover -- much to your horror -- that your home tested positive for lead paint. In this blog, we will go over the importance of removing lead paint from your home, and discuss why ECOBOND® is the best of the available lead paint removal products.
Why Do You Need to Remove Lead Paint?
Here's a list of reasons why you must remove lead paint from your home:
- Lead paint located on egresses (doors and windows) will erode over time, and cause a toxic environment.
- Lead paint that is chipping is already releasing toxic fumes into the air.
- If you are renting to a family with children, it is especially important to remove lead paint, because the toxicity factor is doubly felt by young children. Lead paint that chips and lands onto children's toys (which can then be put into their mouths) are especially dangerous.
Why you should hire a professional to remove lead paint...and why you should ask that they use ECOBOND®!
- Removing lead paint is not something that should be done by anyone but a professional -- a professional is trained to handle lead remediation without causing air toxicity.
- ECOBOND® products have been tested, using EPA methods, and has been definitively shown as effective at treating and remediating lead. In fact, the ECOBOND® family of products have been extensively used throughout the US and internationally in successfully treating lead hazards in over 11,000,000 tons of material.